interface cellular 0/0

On Mediant 800 MSBR devices with the appropriate hardware revision, this command allows defining an Internet connection via a cellular 3G modem connected to the USB port.

The command creates the cellular interface and enters the “conf-cellular” CLI context, where additional settings are available.

Syntax

interface cellular 0/0

Default

By default, the cellular interface is not configured.

Note

The shutdown, route default, napt, ppp user, ppp authentication commands are applicable in the “conf-cellular” CLI context.

Command Mode

Privileged User

Example

This example defines a cellular interface:

(config-data)# interface cellular 0/0
(conf-cellular)#